Pump Technology & Maintenance Guides
Explore practical guides on centrifugal pump priming, mechanical seal selection, replacement, and maintenance. These resources help plant and maintenance teams understand common service considerations and identify the operating details to discuss when requesting pump support.
Centrifugal Process Pump or Sludge Pump? A Boundary Checklist
“Sludge” does not describe one consistent liquid. It may be a pumpable liquid with limited suspended solids, or a thick, settling mixture containing fibers, grit, grease and gas. Choosing between an ANSI…
Chemical Pump Material Selection: Data to Confirm First
“Stainless steel pump” is not a complete material specification. A chemical-process pump contains several wetted components, and the environment that controls their performance includes more than the chemical name. Concentration, temperature, impurities,…
System Curve, BEP and Low-Flow Pump Operation
A pump does not impose one fixed flow on every system. The actual operating point is created by the interaction between the pump and the system. Understanding that interaction is essential when…
Mechanical Seal Failure Root Cause Checklist
When a centrifugal-pump mechanical seal leaks repeatedly, replacing the seal may restore operation without correcting the cause. The seal operates at the boundary between a rotating shaft, stationary housing, pumped liquid and…
Repair or Replace an Industrial Process Pump?
A leaking seal, damaged impeller or noisy bearing does not automatically mean that the complete pump should be replaced. It also does not mean that replacing the failed part will solve the…
Urgent ANSI Pump Replacement Parts RFQ Checklist
When a process pump is down, the fastest message is not always the fastest route to a correct quotation. “Need impeller urgently” leaves the supplier to ask for the pump size, part…
How to Read a Pump Nameplate and Drawing for Replacement
A pump nameplate is the fastest starting point for a replacement enquiry, but it is rarely the only evidence required. The nameplate identifies the equipment record; the drawing and part information identify…
Pump Selection Data Required Beyond Flow and Head
Flow and total dynamic head are essential pump-selection inputs, but they do not describe the complete duty. Two applications with the same nominal flow and head can require different pump sizes, materials,…
Different Methods of Priming Your Centrifugal Pump
Priming fills the pump casing and suction line with liquid so the impeller can build pressure; a centrifugal pump cannot move air. Depending on suction lift, liquid and how often the pump starts, priming…
Need Help Applying This Pump Information?
Technical articles are general guidance. Confirm the actual duty point, liquid, materials and installation before selecting a pump.
Start with a practical question
Popular Pump Selection and Maintenance Topics
Centrifugal Pump Priming
Review manual priming, vacuum-assisted priming and when a self-priming configuration may deserve a separate application review.
Read the priming guideMechanical Seal Types
Compare common seal arrangements and the liquid and operating data needed before discussing a seal configuration.
Compare seal typesMechanical Seal Replacement
Use the maintenance checklist to collect pump identity, damage evidence and installation details before requesting parts support.
Review replacement stepsSeal Face Material
Understand why fluid, temperature, solids and lubrication conditions matter when discussing seal-face materials.
Review material factorsTurn Technical Reading Into a Pump Review
ANSI pump selection guide
Work through duty point, liquid, suction, pump family, material, seal and document requirements.
Open the selection guideANSI process pump FAQ
Find concise answers covering series ranges, curves, NPSH, low-flow service, self-priming layouts, materials and replacement parts.
Open the FAQ centerNeed a project-specific answer?
Articles explain the questions to ask; a quotation still requires the actual duty, liquid, installation and commercial scope.