Pump Technical Downloads
Reviewed technical documents for YSM ANSI/ASME B73.1 process pumps and S series split case pumps. Every file carries a document number, revision and issue date on its title page — always download the current revision from this page instead of reusing saved copies.
G196 Series Documents
| Document | Applicability | Revision | Issued | Format |
|---|---|---|---|---|
| G196 Performance Coverage Curves | G196 series (GP and LF) | Rev. A | 2026-07-11 | PDF, 461 KB, 4 pp. |
| G196 Sectional Drawing & Parts List | G196 wet end and power end | Rev. A | 2026-07-11 | PDF, 508 KB, 7 pp. |
| G196 Installation Dimensions | G196 series | Rev. A | 2026-07-11 | PDF, 293 KB, 4 pp. |
| G196 / 3196 Interchangeability Tables | G196 vs Goulds 3196 (STX–XLTX) | Rev. A | 2026-07-11 | PDF, 501 KB, 7 pp. |
D Mark III Series Documents
| Document | Applicability | Revision | Issued | Format |
|---|---|---|---|---|
| D Mark III Performance Coverage Curves | D Mark III series | Rev. A | 2026-07-11 | PDF, 362 KB, 4 pp. |
| D Mark III Sectional Drawing & Parts List | D Mark III wet end and power end | Rev. A | 2026-07-11 | PDF, 397 KB, 5 pp. |
| D Mark III Installation Dimensions | D Mark III series | Rev. A | 2026-07-11 | PDF, 333 KB, 4 pp. |
| D Mark III / Mark III Interchangeability Tables | D Mark III vs Durco Mark III type | Rev. A | 2026-07-11 | PDF, 511 KB, 7 pp. |
Goulds, 3196, Durco and Mark III are trademarks of their respective owners; YSM Pumps is an independent manufacturer and is not affiliated with, sponsored or endorsed by ITT Goulds Pumps or Flowserve.
S Series Split Case Pump Documents
| Document | Applicability | Revision | Issued | Format |
|---|---|---|---|---|
| S Series Split Case Pump Reference Data Sheet (KSB Omega replacement review) | S series axially split double-suction pumps, DN 80–800, 2900 / 1450 / 960 / 725 r/min | Rev. A | 2026-09-20 | PDF, 258 KB, 9 pp. |
Contents: the catalogue envelope, the four interfaces checked before a replacement pump is built, the 52 size and speed combinations of the standard programme with flow, head and largest motor rating, the sectional drawing with a bilingual 32-item parts list, materials of construction, supply scope, and performance coverage charts at 2900, 1450, 960 and 725 r/min. Vertical OA / OB unit dimensions are issued per size with the quotation. Product page: KSB Omega Replacement Pump.
Checklists and Worksheets
| Document | Applicability | Revision | Issued | Format |
|---|---|---|---|---|
| Urgent ANSI Pump Parts RFQ Checklist (A4) · Letter | Replacement-part enquiries for ANSI/ASME B73.1 pumps; companion to the urgent RFQ checklist guide | Rev. 2026-09 | 2026-09-19 | PDF, 90 KB, 2 pp. |
| Pump Nameplate & Drawing Identification Worksheet (A4) · Letter | Identifying an installed pump and part before a replacement enquiry; companion to the nameplate and drawing guide | Rev. 2026-09 | 2026-09-19 | PDF, 115 KB, 2 pp. |
Print, complete and reply by email with the photographs attached. Both sheets are also linked from their guides.
Document Control
- Files on this page are the current published revisions; superseded revisions are withdrawn from this page.
- Coverage curves and series tables are for preliminary screening — final selection is confirmed against a size-specific reviewed curve issued with quotation.
- Certified GA drawings, size-specific curves and order documents are issued per project through the RFQ process.
Downloads FAQ
How do I know a file is the current revision?
Each title page carries a document number, revision letter and issue date. This page always lists the current revision only; if your saved copy shows an earlier revision or date, download the file again.
Are the coverage curves enough for final pump selection?
No. Coverage charts show the hydraulic envelope of the series and are intended for preliminary screening. Send your duty point and liquid data and YSM will issue a size-specific reviewed curve with the proposal.
How do I get a certified drawing or a document that is not listed?
Request it through the contact form with your model, size and order or enquiry reference. Certified GA drawings and order-specific documents are issued per project after review.
Need a Reviewed Curve or Certified Drawing?
Send your duty point, liquid data or nameplate details and the document you need.