ISO Range · KZ API 610 OH2
The KZ range is an end-suction process pump family to ISO 13709 / API 610 type OH2, carrying hot and cold process duties to 425 °C and 100 bar. Modular construction gives broad parts interchangeability across the range.
Pressure to 100 bar (1,450 psi). Series-level figures bound the envelope; the operating point of the specific size governs, confirmed on the reviewed curve.
Quick Selection Summary
| Capacities | to 2,600 m³/h (11,440 US gpm) | Heads | to 300 m (1,000 ft) |
| Pressure | to 100 bar (1,450 psi) | Temperatures | to 425 °C (800 °F) |
Series-level figures bound the envelope; the operating point of the specific size governs the selection. Performance is confirmed against your duty point during the review.
Features and Benefits
- Wide hydraulic range map for ISO 13709 (API 610) type OH2 pumps
- Designed for hot and cold process applications
- Modular construction for broad parts interchangeability
- Finned bearing housing and fan cooling for long bearing life
Applications
- Boosting
- Refinery, petrochemical and chemical process applications
- Desalination
- Boiler feedwater booster
- Condensate extraction
- HTF oil circulation
Design & Manufacturing
The KZ range follows ISO 13709 / API 610 type OH2 conventions: centreline-mounted end suction, back pull-out, with the bearing and cooling arrangement sized for hot process service.
Wet-end castings run through YSM’s own foundry routes — sand, lost-foam and V-process — with traceable inspection reports; the material grade is confirmed to the liquid at selection.
Dimension tables are not published for this range. Envelope and interface dimensions are confirmed against your installed pump or project datasheet during the selection review.
Replacing Installed Pumps
The KZ range is offered as a non-OEM alternative for equivalent Sulzer-type installations; replacement feasibility and interface dimensions are confirmed against the installed pump’s API datasheet during the selection review.
Start from the ISO 5199 / ISO 2858 range hub, or send the nameplate with the duty as run today.
Request a Selection
A complete enquiry closes in one review cycle. Include the duty point — normal, minimum and maximum flow with required head — the liquid with its concentration, temperature, specific gravity, viscosity and solids; the wetted material and sealing arrangement in service; documentation of the installed pump where this is a replacement; motor voltage and frequency; and quantity, inspection or documentation needs, destination and target delivery date. Anything unknown can be stated as unknown — a marked gap is reviewable, a silent one is not.
Prepare it faster with the selection data guide; then send the enquiry.
KZ API 610 OH2 Pump FAQ
Is the KZ supplied to an API 610 datasheet?
Yes — selections are reviewed against the project’s API 610 datasheet, and the OH2 configuration follows ISO 13709 conventions for hot and cold process services.
Can the KZ replace an installed Sulzer-type pump?
Yes — the range is offered as a non-OEM alternative for equivalent Sulzer-type installations. Replacement feasibility and interface dimensions are confirmed against the installed pump’s documentation during the selection review; nothing is promised from a family name.
Do you publish dimension tables for this range?
No. Selections are quoted against the duty point and the installed pump’s documentation; envelope and interface dimensions are confirmed during the selection review rather than read from a published table.
Which materials are available?
Wet-end castings are produced through YSM’s own foundry routes — sand, lost-foam and V-process — with traceable inspection reports. The material grade is confirmed to the liquid and its concentration at selection.
What data closes a selection in one cycle?
The duty point as run today, the liquid with temperature and concentration, the wetted material and sealing arrangement in service, documentation of the installed pump where this is a replacement, motor voltage and frequency, and quantity with destination. Anything unknown, stated as unknown.
What are the lead time and warranty for this pump?
Typical lead time is 4 weeks for a complete pump, 2 weeks for a bare wet end and 1 week for replacement parts, from deposit and approved drawings. Warranty is 12 months from shipment against defects in materials and workmanship within the reviewed duty. Late shipment attributable to YSM is compensated at 0.5% of contract value per week, capped at 5%.
What are the payment and delivery terms?
30% T/T deposit within 7 days of order, 70% T/T before shipment, or irrevocable L/C at sight; export-grade wooden-case packing; any Incoterms 2020 term (EXW Zibo, FOB Qingdao, CIF, DAP/DDP) as agreed in the quotation. Factory witness testing and third-party inspection (SGS, BV, TÜV) are accepted. Full terms: Commercial Terms
All manufacturer names, model numbers and trademarks are used for reference and compatibility identification only. YSM Pumps (Jinan Yingsiman Machinery Co., Ltd.) is not affiliated with, sponsored by, or endorsed by any of these manufacturers. All pumps and parts are non-OEM and manufactured by YSM.
