Industrial Pump Applications
Chemical Processing
Pump solutions for acids, alkalis and process liquids. Final model and material selection should be based on fluid composition, temperature and duty point.
Water Treatment
Process and transfer pumps for treatment systems, chemical handling and plant utilities. Send flow, head and liquid data for model selection.
Pulp and Paper
Heavy-duty process pumps for chemical handling and mill utilities, selected around solids, viscosity and operating conditions.
Mining and Abrasive Duties
Pump options for abrasive process liquids and slurry-related duties. Provide solids concentration, particle size and duty data before selection.
Low-Flow Chemical Service
Low-flow ANSI process pump options for controlled chemical transfer and demanding low-capacity duties. Send the operating point and fluid properties.
High-Volume Process Service
Heavy-duty process pump options for higher-capacity industrial duties. Send required flow, head, temperature and liquid properties for sizing.
Self-Priming Transfer
Self-priming process pump solutions for suction-lift and below-grade transfer duties where reliable repriming is important.
General Industrial Process
General-purpose ANSI process pump options for chemical and industrial transfer services, with material and seal selection based on duty data.
Corrosive Fluid Handling
Low-flow and general process pump options for corrosive media. Material and seal recommendations require complete chemical and temperature data.
Application-to-Product Quick Map
Use this map as a starting point before sending the full duty point. Final pump and material selection still depends on flow, head, liquid properties, temperature, suction conditions and solids.
| Application need | Recommended starting page | RFQ note |
|---|---|---|
| Chemical process transfer | G196 Series ANSI chemical process pumps | Send liquid name, concentration, temperature and material preference. |
| Low-flow chemical service | G196 low-flow process pump | Include minimum, normal and maximum flow. |
| Reverse-vane ANSI duties | D Mark III Series | Confirm group, size, seal chamber and existing reference if available. |
| Heavy-duty or paper-stock review | G 3175 / 3180 / 3185 Series | Send solids, fiber or viscosity data and an approved duty point. |
| Self-priming transfer | 3796 self-priming process pump | Include suction lift, pipe layout and priming requirements. |
Send Your Application Duty Point
Include the application and liquid, the duty point or operating range with required head, temperature, suction conditions, material preferences and any existing pump details. The quick map above is a starting point — the reviewed duty decides the final route.
Open “Add technical details” to fill in what you know, and mark anything uncertain as unknown — a marked gap is reviewable, a silent one is not.
Pump RFQ
Replied by the technical team with the reviewed pump route and quotation scope.
Application library
Process Pump Applications and Maintenance Paths
Start with the operating problem, then move to the applicable pump family, technical checklist and reviewed RFQ.
Chemical Process Liquid Transfer
Define the duty point, liquid, suction, material and seal inputs before reviewing an ANSI process pump route.
Review chemical transferLow-Flow Process Pumps
Compare the system operating range with dedicated G196 LF and D Mark III Low Flow routes.
Review low-flow applicationsPulp and Paper Pumps
Pump types by mill area, stock consistency limits and materials, with the paper-stock data a G 3175 / 3180 / 3185 review needs.
Review pulp and paper pump dutiesANSI Pump Maintenance & Replacement
Use nameplates, drawings, parts references and operating data for a Goulds 3196 or Durco Mark III replacement enquiry.
Review maintenance and replacementWastewater application boundary
Industrial Wastewater Chemical Transfer
Separate defined treatment-chemical or controlled-liquid duties from raw sewage, grit, scum and thickened sludge before choosing a pump family.